Honeywell Universal Digital Controllers

Product Details:

The DC1000 Series are microprocessorbased controllers designed with a high degree of functionality and reliability at a competitive price. The controllers are available in different formats: 48x48 (1/16 DIN), 48x96 (1/8 DIN), 72x72 (3/16 DIN), 96x96 (1/4 DIN). This controller series is ideal for the control of temperature, humidity, pressure, flow etc.

Product Details:

The DC1000 Series are microprocessorbased controllers designed with a high degree of functionality and reliability at a competitive price. The controllers are available in different formats: 48x48 (1/16 DIN), 48x96 (1/8 DIN), 72x72 (3/16 DIN), 96x96 (1/4 DIN). This controller series is ideal for the control of temperature, humidity, pressure, flow etc.

Product Details:

New Power and Flexibility the UDC3200 Universal Digital Controller packs new powerful features in the popular 1/4 DIN size. Unmatched application power includes Infrared (IR) Configuration interface, two universal analog inputs and a Math Algorithm. When these are combined with the Accutune III™ tuning with fuzzy logic overshoot suppression, the result is price/performance leadership. Application flexibility is assured by the universal analog inputs, universal AC power supply, two digital inputs, a maximum of five analog and digital outputs, RS422/485 Modbus RTU or Ethernet 10Base-T TCP/IP communication protocols, simple configuration plus total field upgrade capability for any optional feature.

Features:

• Enhanced Display
• Built-in infrared communications port for configuring with a Pocket
• PC or Laptop-PC Based Configuration Tools-Ethernet Communications
• Two Analog Inputs
• Accutune III, Fast/Slow, Heat/Cool
• Thermocouple Health Monitoring

Additional Information:

• Item Code: UDC3200

Product Details:

The UDC1200 & UDC1700 are microprocessor-based 1/16 DIN and 1/8 DIN controllers, which combine a high degree of functionality and reliability at low cost. They are fully dedicated to monitor and control temperatures, pressures and levels in a wide range of applications such as environmental chambers, furnaces, ovens, packaging machines and other applications in plastics and the food and beverage industries. The large and easy-to-read dual 4-digit display and tactile keypad make the UDC1200 and UDC1700 easy to configure and use. Their outstanding flexibility enables you to configure any unit for any application and change it if required.

The following can be selected via the Model selection Guide:

• RS485 ASCII communication
• RS485 Modbus RTU communication
•  Digital Input

Alarms:

• Outputs 1, 2 and 3 can be used as alarms. Two electromechanical single pole double throw relays can activate external equipment when alarm setpoints are reached.
• An LED is also activated on the front-face. A direct or reverse acting alarm output can be configured.
• A logical combination of the two alarms: OR, AND or hysteresis (active when both alarms are active and inactive when both alarms are inactive) can be set which associates the two alarms status before energizing the relay.
• In order to detect a defective control loop, the controller can supply special loop alarm control by continually monitoring the PV response to output demand.
• A timer is automatically set up when any output is on saturation mode.
• When the timer reaches twice the reset time with no PV response, the loop alarm is activated.
• With this soft alarm there is no need for a heater circuit breaker, saving wiring time and costs.

Limit Controller:

• The UDC1200 1/16 DIN limit controller provides a latched relay output which is activated when the process parameters either exceed or fall bellow the desired value, providing a failsafe cut-off which has to be manually reset before the process can continue.
• The UDC1200 limit controller can be configured to be either a “high limit” unit where the delay will de-energize when the PV is above the limit setpoint, or a “low limit”, where the relay will drop out when the PV falls below the setpoint.
• A LED indicator shows when limits have been exceeded, and when the relay is latched out.
• The optional digital input allows a remote reset function.

Additional Information:

• Item Code: UDC1200-1700

Product Details:

The UDC2500 Universal Digital Controller is a new, low-priced addition to Honeywell’s Controller family. This controller introduces new features in the popular low priced ¼ DIN size while retaining all the reliability, cost effectiveness, simplicity, and popular HMI of Honeywell’s UDC 2300.

The UDC2500 monitors and controls temperatures and other variables in applications such as:

• Furnaces and ovens
• Environmental chambers
• Packaging machinery
• Plastic processing machines

Additional Information:

• Item Code: UDC-2300