Honeywell Sensors

Product Details:

Product Details:

It is the same portable multigas detector that has been the number one selling Multi Gas monitor for the last 7 years but now with the benefit of a new lithium polymer battery giving an additional battery life of up to 18 hours in comparison to the 10 hours of the its predecessor the Microclip XT. This unit has been Gas Monitor Points primary multi gas monitor for the past few years due to its small design and one button operation giving the user an easy to use monitor offering personal multi gas warning in confined spaces and other hazardous areas. The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW’s MicroDock II automatic test and calibration system and Fleet Manager II software.

 

GasAlertMicroClip Standard Features:

• Guaranteed runtime for at least a 12-hour shift-down to -20°C-without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery-tested to last in extreme environments n Ergonomic and wearable-doesn’t weigh you down
• Real-time gas concentrations shown on LCD n Bright, wide-angle visual alarm bars
• IP68 rating ensures maximum protection against dust and water-up to 45 minutes at a depth of 1.2 m
• User-friendly, tamper-proof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
• Compatible with MicroDock II docking station for automated bump tests and calibration
• Compatible with Fleet Manager II software for reporting and fleet management
• Multi-language support in English, French, German, Spanish and Portuguese

The BW MicroClip XL can be configured to monitor combinations of the following gases:

• Combustible %LEL
• Oxygen (O2)
• Carbon Monoxide (C0)
• Hydrogen Sulfide (H2S)

Benefits:

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward use and training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

 

Product Details:

H7080B series duct mounting humidity and temperature sensors are designed for environmental monitoring and control applications in industrial, commercial and general building. These sensors can be used for discharge, or return air control.

Features:

• 4~20mA/ 0~10VDC or resistance output for temperature
• 4~20mA/ 0~10VDC output for humidity
• Duct mounted
• Excellent linearity
• Good long term stability
• High reliability
• Wide sensing range
• Easy installation

Installation:

• Drilling a mounting hole on the duct near measuring point.
• Use enclosed screws to install the flange with gasket on the duct. Insert the probe pipe into flange and duct.
• Fix the probe pipe on the flange by enclosed screw. (Note: Plug face to the bottom direction)
• Unscrew & open the front cover of the product.
• Lead wire from DDC or PLC panel through plug.
• Using screw driver to connect each wire to the terminals of the transducer module according to field wiring diagram.
• Tighten the waterproof plug around the wires.
• Put front cover back and tighten front cover by screws

Additional Information:

• Item Code: H7080B

Product Details:

Temperature sensor for Duct measurement in ventilation and air conditioning vents. The RSPT1000 sensors with Pt 1000 sensing element are used in ventilating and air conditioning systems to measure discharge, return or outside air temperature. They are designed for duct mounting. PG9 cable entry and sealing rings for housing supplied withthe sensors as bypack.

Additional Information:

• Item Code: RSPT1000

Product Details:

We are instrumental in distributing and supplying an exclusive assortment of Co2 Sensors. These sensors are procured from some of the trustworthy and certified vendors of the industry. They are designed in compliance with the international quality standards. Our offered sensors are highly valued among clients for their durable finish, easy installation, compact size and low maintenance. Clients can avail the offered sensors from us at the most affordable price range.

 

Description:

• Designed to detect carbon dioxide gas in the air
• This model has resolution by NDIR method, so it is an optimum device for ventilation of buildings, houses, etc.

Features:

• High sensitivity and good resolution
• High technology adopted by NDIR method
• No calibration needed in installation

Additional Information:

• Item Code: CDS2000A1000

Product Details:

Watlow manufactures a variety of resistance temperature detectors (RTD) sensors that are specially designed to ensure precise and repeatable temperature measurement. Watlow sensors are built to meet the most demanding industrial applications while providing a lower total cost of ownership for our customers.
Features:

• Strain-free construction provides dependable, accurate readings and allows elements from different lots to be substituted with no recalibration needed
• High signal-to-noise output increases accuracy of data transmission and permits greater distance between sensor and measuring equipment
• Temperature coefficient (alpha) carefully controlled while insulation resistance values exceed DIN-IEC- 51 standards ensures sensor sensitivity

Product Details:

Install CO Sensors and contribute to energy conservation. One of the most common applications is in Basement Parking Ventilation Systems.

Features:

• Analog input from sensor convertible to four ON/OFF outputs
• Using a single analog sensor easily realizes a system setup of liquid level monitoring.
• Supports both voltage and current types of analog input
• veraging reduces input noise, stabilizes operation, and improves display intelligibility.
• Adjustable hysteresis
• Hysteresis on each output is individually adjustable to avoid chattering around the threshold.